JD Foster
JD@DeepSouthFAB.net
jfos@bellsouth.net
back to
home page
Early Bronco Aluminum fuel tanks
typical replacement aluminum fuel tank fabricated from 1/8" aluminum treadplate
all bends are formed for strength/ tig welded and tested
21 gals/ has sending unit for stock EB gauge/
3/8"npt drain bung/ 3/8" npt supply bung
uses stock type strap for mounting
has 1" spacers on top of fuel tank to clear sending unit (bolts on top)
stock location fill and vent piping
it is a non venting tank (I can install vent or you can get a vented gas cap)
it is sold as off-road use only due to non DOT rated.
options include/return bung, sending unit for aftermarket gauge (ohms readings)
internal baffle, intank pump for fuel injected engines
_______________________________________________________________________
aluminum tank with Ford Explorer in tank pump/sending unit. Explorer pump sold seperately
using the Explorer pump will require a 2" body lift
EMAIL ME (JD) IF YOU'D LIKE MORE INFO!
typical replacement aluminum fuel tank fabricated from 1/8" aluminum treadplate
all bends are formed for strength/ tig welded and tested
21 gals/ has sending unit for stock EB gauge/
3/8"npt drain bung/ 3/8" npt supply bung
uses stock type strap for mounting
has 1" spacers on top of fuel tank to clear sending unit (bolts on top)
stock location fill and vent piping
it is a non venting tank (I can install vent or you can get a vented gas cap)
it is sold as off-road use only due to non DOT rated.
options include/return bung, sending unit for aftermarket gauge (ohms readings)
internal baffle, intank pump for fuel injected engines
_______________________________________________________________________
aluminum tank with Ford Explorer in tank pump/sending unit. Explorer pump sold seperatelyusing the Explorer pump will require a 2" body lift
EMAIL ME (JD) IF YOU'D LIKE MORE INFO!